iTrainer TP16 | Electronic dog fence

The iTrainer TP16 electronic dog fence is a rechargeable electronic fence with a waterproof receiver. The total distance is set on the base unit, from 30 cm to 4 m. The receiver is also charged from the base (USB connector) and can also be charged from any USB power source (5V). The iTrainer TP16 fence offers adjustable correction strength. You can set 5 levels - from no impulse to a very strong impulse. The iTrainer TP16 invisible fence is suitable for breeds from 5 kg. There is no maximum weight limit.

Zone settings

iTrainer TP16 offers sound and impulse functions. The sound is emitted at the same time as the discharge. The correction zone is adjustable from 30 cm to 4 m depending on the installation type and wire length.

Correction type

The iTrainer TP16 fence offers adjustable correction strength. You can set 5 levels - from no impulse to a very strong impulse. The iTrainer TP16 invisible fence is suitable for breeds from 5 kg. There is no maximum weight limit. The receiver beeps and delivers an impulse at the same time.

Wire included

The basic iTrainer TP16 electronic fence package includes 200 metres of wire (however, it is very thin - we recommend surface installation), which is fully sufficient for most installations. If the wire included is not enough, it can be easily extended up to a distance of 1000 metres.

Battery and charging

The receiver of the iTrainer TP16 is powered by a Li-ion rechargeable battery, which you can easily recharge using the supplied USB cable. Charging time is approx. 2 hours, battery life per charge 7-15 days. The battery capacity and voltage are 550 mAh and 3.7V, type 20161229. It has an LED indicator for battery status. The base unit is powered from the mains. You can purchase a backup power supply with a battery for operation during a power outage. If mains power is not available, the base unit can be powered from a car battery.

Waterproof

iTrainer TP16 has a waterproof receiver, suitable for use even in heavy rain and humid environments. It can be submerged to a depth of half a metre, but only for a short time.

Number of dogs

iTrainer TP16 can be used for an unlimited number of dogs. By purchasing additional collars (receivers), you can easily expand it. No set-up is required.

Collar length

iTrainer TP16 has a durable nylon collar. It does not bother the dog when worn and holds well on the neck. The collar length is adjustable from 20 to 55 cm. The collar can be replaced with a longer one; simply write your dog's neck circumference in the note, or the device can be fitted to your own collar.

Weight and dimensions

The base unit is 10.9 cm wide, 12.9 cm high and 4.3 cm deep. The receiver is 6.9 cm wide, 3.8 cm high and 3.1 cm deep and weighs 84 grams including the collar.

Technical specifications may change without prior notice. Images are for illustrative purposes only.