Nano Protech - protection from moisture

The unique formula penetrates NanoProtech moisture and rust quickly and fills the smallest cracks and pores at the molecular level. NanoProtech forms a durable water-repellent layer in that the surface is sealed against moisture and corrosion. This film acts as an insulator, preventing leakage current, is durable, and can be applied to moving parts effectively. Safe for metal, plastic, rubber, glass, ceramics, lacquer and paint. Free of silicone.

Where to use: 

• Alternators, Generators
• Distribution and Fuse boxes
• Servos and step Motors
• Batteries and their Terminals
• Garden and Workshop Machines and Tools
• Construction machinery
• Electronics, PCB, Mobile phone, Boards
• Low and High-voltage Systems
• Electrical devices damaged by water

Technical characteristics:

• Corrosion protection
• Retains properties at -80 ° C to + 140 ° C
• Operates for up to 1 year
• Consumption: approx  per m2
• Volume: 75 ml

Use:

Shake well before use. Do not use live equipment. surface or component injected at a distance of 20 to 30 cm. Pretreatment of the surface is not necessary. Due to the high capillary action of the NanoProtech formula, the product will also have an effect if it is applied to damp or dirty surfaces. The best effect is obtained, however, on a clean surface. After the activation period of 10 to 15 minutes, the excess residual can be removed. The full effect is reached within 24 hours. Consumption 40ml / m2. Apply at -20 ° C to + 35 ° C. Retains properties at -80 ° C to + 140 ° C. Effective for at least 1 year after treatment (depending on conditions of application and use).

Repeat as necessary treatment.